 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters FEATURES * 1 to 10 mbar, 1 to 10 "H2O differential pressure * High level output, 1...6 V or 4...20 mA (2-wire connection) * Precision temperature compensated and calibrated * Rugged aluminium housing * Female 1/8" BSP and 1/8" NPT fittings MEDIA COMPATIBILITY Pressure inlet: Non-corrosive, non-ionic working fluids such as air, dry gases and the like Housing: Aluminium, protection class IP 67 (according to DIN EN 60529) respectively NEMA 61 ELECTRICAL CONNECTION SPECIFICATIONS12 Maximum ratings +Vs 1...6 V output version 1 12 to 32 V Supply voltage Output current BTEL/PTUL5...D1... Source Sink BTEL/PTUL5...D4... Temperature limits Storage Operating Compensated Proof pressure2 BTEL/PTUL5...01D... BTEL/PTUL5...02D... all others Pressure at any port3 BTEL/PTUL5...01D... BTEL/PTUL5...02D... all others 11 12 to 32 V sensor 2 Vout 4 GND -Vs 3 case V 20 mA 10 mA 30 mA -40 to 100C -25 to 85C 0 to 50C 250 mbar / 100 "H2O 250 mbar / 100 "H2O 350 mbar / 150 "H2O 500 mbar / 200 "H2O 500 mbar / 200 "H2O 750 mbar / 300 "H2O 4...20 mA output version 1 +Vs sensor 4 -Vs 3 case V 12 to 32 V RL GND June 2008 / 094 1/6 www.sensortechnics.com BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters COMMON PERFORMANCE CHARACTERISTICS9 Characteristics Operating pressure BTEL5001... BTEL5P01... BTEL5002... BTEL5P02... BTEL5005... BTEL5P05... BTEL5010... BTEL5P10... PTUL5001... PTUL5P01... PTUL5002... PTUL5P02... PTUL5005... PTUL5P05... PTUL5010... PTUL5P10... Position sensitivity Non-linearity and hysteresis4 Output noise (0 < f < 1 kHz) Long term stability5 BTEL/PTUL5...01D... all others Thermal effects (0 to 50C)6 Offset BTEL5...01D... BTEL5...02D.../ PTUL5...01D... all others Span Response time (10 to 90 %) Min. 0 -1 0 -2 0 -5 0 -10 0 -1 0 -2 0 -5 0 -10 Typ. Max. 1 1 2 2 Unit mbar 5 5 10 10 1 1 2 2 5 5 10 10 0.5 0.1 0.04 %FSO 0.5 0.2 0.08 0.04 0.02 0.04 1 0.16 0.10 %FSO/C 0.06 0.08 ms 0.25 %FSO/g "H2O June 2008 / 094 2/6 www.sensortechnics.com BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters PERFORMANCE CHARACTERISTICS9 1...6 V output versions (unless otherwise noted VS = 15 V, tamb = 25C, RL > 100 k, com. mode pressure = 0) Characteristics Zero pressure offset Full scale span8 Full scale output Output impedance Power supply rejection Power consumption Offset Span 7 Min. BTEL/PTUL50...D1... BTEL/PTUL5P...D1... BTEL/PTUL50...D1... BTEL/PTUL5P...D1... 0.9 3.4 4.9 2.4 Typ. 1.0 3.5 5.0 2.5 6.0 0.05 0.03 60 Max. 1.1 3.6 5.1 2.6 50 Unit V %FSO/V mW 4...20 mA output versions (unless otherwise noted VS = 15 V, tamb = 25C, RL = 100 , com. mode pressure = 0) Characteristics Zero pressure offset Full scale span8 Full scale output Output impedance Power supply rejection Power consumption (IL = 20 mA) Offset Span 7 Min. BTEL/PTUL50...D4... BTEL/PTUL5P...D4... BTEL/PTUL50...D4... BTEL/PTUL5P...D4... 3.9 11.9 15.9 7.9 Typ. 4.0 12.0 16.0 8.0 20.0 0.05 0.03 260 Max. 4.1 12.1 16.1 8.1 0.1 Unit mA %FSO/V mW ELECTROMAGNETIC CAPABILITY10 Test conditions Radiated, radio frequency electromagnetic field immunity (RFI) Electrical fast transient / burst immunity (EFT) Electrostatic discharge immunity test (ESD) Immunity to conducted disturbances induced by radio-frequency fields EN61000-4-3: Grade 3 10 V/m, 80 MHz to 1000 MHz 80 % AMC (1 kHz) Grade 3 2 kV Grade 4 8 kV, contact discharge Grade 3 0,15 to 80 MHz 10 V, 80 % AMC (1 kHz) Criterion A B B A Interference <1 % FSO <1 % FSO <1 % FSO <1 % FSO EN61000-4-4: EN61000-4-2: EN61000-4-6: June 2008 / 094 3/6 www.sensortechnics.com BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters Specification notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. IP 67 protection for BTEL/PTUL5...A is given with locked connector only. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. This is the highest pressure which can be applied to any port at any time. At the same time the differential pressure between the ports H and L must not exceed the maximum proof pressure. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span. Long term stability is the change in output after one year or 1 million pressure cycles. Thermal effects tested and guaranteed from 0...50 C relative to 25. All specifications shown are relative to 25C. Calibrated after minimum 3 minutes warm-up time. Full scale span is the algebraic difference between the positive full scale output and zero pressure offset. Higher pressure applied to port H. Test are in accordance with EN61000-6-2, April 1999. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. CE-labelling is in accordance with 89/336/EEC. LOAD LIMITATION 4...20 mA output version 1200 Ohm 1000 800 600 400 200 operating range 0 10 20 30 V Vsupply June 2008 / 094 4/6 www.sensortechnics.com BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters OUTLINE DRAWING Connector version 40.0 (1.58) 20.0 (0.79) NOM 86.0 (3.39) 72.0 (2.84) 13.5 diam. (0.53) H: high pressure port L: low pressure port mating plug 8.0 (0.31) min. M12 x 1 (0.47) 8.0 (0.31) min. 1 2 4 3 2 x M5 (UNC 10-24) mass: typ. 170 g dimensions in mm (inches) 9.0 (0.35) BTE.../PTE...: 2 x 1/8" BSP PTU...: 2 x 1/8" NPT ELECTRICAL CONNECTION Connection 1...6 V 4...20 mA Pin output output 1 +Vs +Vs 2 Vout NC 3 case case 4 -Vs -Vs Cable version 40.0 (1.58) 20.0 (0.79) 90.0 (3.54) 72.0 (2.84) 13.5 diam. (0.53) H: high pressure port L: low pressure port 8.0 (0.31) min. 1 m (3.3 ft) shielded cable 4 x 0.25 mm (AWG24) 8.0 (0.31) min. 2 x M5 (UNC 10-24) 9.0 (0.35) ELECTRICAL CONNECTION Connection 4...20 mA 1...6 V output output bare case/shield case/shield brown +Vs +Vs white NC NC NC green Vout yellow -Vs -Vs BTE.../PTE...: 2 x 1/8" BSP PTU...: 2 x 1/8" NPT mass: typ. 220 g dimensions in mm (inches) June 2008 / 094 5/6 www.sensortechnics.com BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters RECOMMENDED CABLE/CONNECTOR ACCESSORY for connector version Order number ZK000101, other cable lengths on special request NOM 2 m PIN CONNECTION Pin 1 2 3 4 Flying lead end brown green white + shield yellow 36.5 NOM 60 M12 x 1 O 20 Included in delivery! dimensions in mm ORDERING INFORMATION BTEL5/PTUL5 Calibration BTEL: calibration in mbar PTUL: calibration in "H2O Reading 0: unidirectional reading P: bidirectional reading Pressure range 01: 1 mbar / 1 "H2O 02: 2 mbar / 2 "H2O 05: 5 mbar / 5 "H2O 10: 10 mbar /10 "H2O x xx D x x Electrical connection A: connector version C: cable version Output signal 1: 1...6 V 4: 4...20 mA Differential pressure (0...1 mbar not available for output signal 1...6 V) Note: Other pressure ranges and options are widely available. Please contact your nearest Sensortechnics sales representative. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. June 2008 / 094 6/6 www.sensortechnics.com |
Price & Availability of BTEL5002D1A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |